AstroNova QuickLabel QL-300 Guía De Inicio Rápida página 18

5. Rotate the Roll Paper Holder Knob to fix the roll paper core in place.
Rotate the Roll Paper Holder Knob until it clicks.
6. Aligning the Flange with the Roll Paper Holder shaft as shown in the illustration, attach the
Flange.
7. Slide the Flange as far as it will go in accordance with the roll paper width.
Note: Slide the Flange up to the side of the loaded roll paper.
Note: Take care to avoid pinching your fingers or hands when attaching the Flange.
18 QL-300 Quick Start Guide