Allied Vision Goldeye CL Serie Guía Rápida página 16

Launching the application
Step 1: Power up the camera and wait until the Camera Link status LED
stops flashing. This indicates the boot phase is complete.
Step 2: Launch the Vimba Viewer application and wait for the camera to
appear in the Detected Cameras list. This may take a few seconds.
Step 3: Select the desired camera from the Detected Cameras list.
Step 4: A new camera window appears.
Step 5: Open the tab AcquisitionControl and click on AcquisitionStart.
Note the camera is not in automatic image acquisition mode when
started for the first time. Acquisition must be started in the frame
grabber SDK in order to begin receiving images.
Launch the viewing application provided by the frame grabber 
Step 6:
manufacturer.
16