AVIRE Connex-02 Guia De Instalacion página 2

Quick Summary
+ Elevator Safety
+
Installation
+
Wiring diagram
+
Single Connex-02 Installation
+ Input & Output
1. Elevator Safety
Follow all Health & Safety rules and all necessary precautions before taking the lift out
of service.
2. Installation
Depending on selected application, locate required lift signals and use existing DIN rail
or mount a standard in the location where Connex-02 will be installed, this is either:
(a)
(d)
(b)
CANBus Splitter
Universal Power Supply
a. Lift Controller Connex-02 installation - Mount onto
existing DIN rail
b. Top of Car Connex-02 installation - Mount DIN rail
provided with product
c. Lift Controller & Top of Car installation
d. Multiple lift shafts using single DCP (CANBus splitter
will be required)
+
Switch Configuration
+ LED Indicator
+ Adding Connex-02 to the Avire Hub
+ Removing Connex-02 from a DIN rai
(c)
l
2