Front View; Rear View - BLUE WHEEL HX360 Manual De Usuario

DEVICE COMPONENTS
TURN ON
Switch the device on using the power button. This is located at the back of the
hoverboard. The indicator lights show the operational readiness.
RESET TO DEFAULT
1. Place the hoverboard on a flat surface so that the wheels have no contact
with the ground.
2. Press the power button for 3-5 seconds until the warning lights flash.
3. Turn the hoverboard off and on again
36

Front view

1. Foot pad
2. Indicator lights
3. Front lights
4. Brake lights
5. Power button
6. Charging port

Rear view