Troubleshooting - BLUE WHEEL HX360 Manual De Usuario

Problem
Device is not
responding.
LED warning light
(7) is active and a
signal is heard.

TROUBLESHOOTING

Cause and correction of the defects
Hoverboard is not activated.
Please activate our device with the on / off button.
Battery is not fully charged.
Please charge the battery.
A violent shock (caused by a rollover, for example) has shaken
our unit. Since then the LED warning light is red.
Please deactivate our device and then reactivate.
You are travelling at too high a speed.
Reduce the speed. Please get off carefully and calmly.
You are in a steep gradient right now.
Please reduce your speed. Then please calmly and carefully
get off the board.
Wheels are locked.
Please reduce your speed. Get calmly and carefully off the
device. Please clean the wheels from foliage, pebbles, loose
chippings, etc. until they begin to turn again.
Too low battery .
Reduce your speed. Get off the Hoverboard calmly and
carefully. Please charge the battery immediately and fully.
44