Hupfer BDC/50-50 Manual De Instrucciones página 20

Coolstapler - basket stacker with cooling by circulating air
43.3000.3
• Transport should only be undertaken over level floors. Moving the appliance over
very uneven floors can cause damage to the chassis.
• Before transport, release both locking brakes. Moving the appliance with the lock-
ing brakes locked can damage the chassis.
• The appliances are provided exclusively for manual transport. Mechanically as-
sisted transport is not permitted. Danger of injury and damage.
• In the case of transport with the aid, for example, of a lorry the appliances should
be secured. The total locks are not sufficient as transport securing means.
• During transport always grip both handles with your hands, never let go of the ap-
pliance while it is moving.
• Transport over inclined planes or steps is not permitted.
• When approaching walls and moving round obstacles always pay attention to per-
sons in the way. Risk of injury.
• During transport do not move the appliance faster than walking pace. Heavily lad-
en stackers are difficult to brake and steer. If required obtain assistance for trans-
port.
• If a stacker tips over due to outside influences or inattention, never catch it man-
ually. Risk of injury!
• Do not sit or stand on the appliance. Never convey persons with the appliance.
• Do not stop appliances on a sloping floor.
• After stopping, the appliances should be secured against rolling away by means
of both total locks.
• The castors are permitted for temperatures between -20 and +50 °C. Use in other
temperature ranges can result in weakening of the structure of the material. Dam-
age due to mechanical actions can no longer be excluded.
• Follow the cleaning instructions.
• Before transport, switch off the appliance, disconnect the mains plug and insert it
into the holder provided.
• Never pull the mains plug out of the socket by the cable.
The appliances from HUPFER
plug on the standard model. In contrast to a straight shock-proof plug this plug
only sticks out insignificantly from the socket and so cannot be damaged by being
hit at the side.
If the device is moved without pulling out the plug beforehand the socket can - as
a result of the leverage arising through the overstretching of the cable - be severe-
ly damaged or even pulled out of the wall.
• Never move the appliance by pulling on the connecting cable.
• If the plug has come into contact with water it must be dried before it is inserted
into the socket. Danger to life!
• Damaged mains connecting plugs or cables are to be replaced by authorised spe-
cialist staff before the appliance is used.
• The spiral cable is suitable for a maximum extended length of 1.80 m. Forceful
straining of the cable can lead to damage to the internal leads. Fire risk!
• Do not use any extension cables in wet and damp areas.
• Do not clean the appliance with steam-jet or high-pressure cleaners.
If it is anticipated that steam-jet or high-pressure cleaners will be used in the sur-
roundings, then the appliance must be taken out of operation and disconnected
from the mains power supply beforehand.
• Only insert plugs into suitable sockets with earth contacts. If the plug does not fit,
the mains connecting cable should be adapted by authorised specialist staff (see
plug types which can be used on page 30).
The use of socket adapters is not permitted. Fire risk!
®
are equipped with an angled earthing contact
21