Description Of The Appliance And Its Accessories; Assembly; Accessories; Preparation - Imetec DUETTA Instrucciones Para El Uso

EN
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (Fig. A)
refer to Figure [a] in the illustrative guide to verify your appliance equipment. all the figures
are on the cover pages of these instructions for use
1. Handle
2. handle oN/oFF switch
3. Fastening screw
4. plug
5. manual mini-vacuum release buttons
6. suction inlet
7. turbo brush
7a brush release button
7b rotating brush clamping screw
7c rotating brush
8. manual miNi-vacuum
8a Dust compartment release key
8b Dust collection compartment
• loosen the fastening screw (3) of the handle (1) and remove it.
• attach the handle (1) to the body of the appliance, taking care to assemble it correctly
[Fig. b1].
• insert the fastening screw (3) and tighten it clockwise [Fig. b2] using a screwdriver.
• attach the turbo brush (7) to the suction connection (6) [Fig. b3].
• put the various accessories (10b+10c+10D) on the accessory support 10a [Fig. b4].
• secure the accessory support (10a) by pressing it gently into place on the back of the
stick body [Fig. b5].
your appliance is equipped with the following attachments:
• TURBO BRUSH (7): the turbo brush (7) is suitable for all surfaces: ceramic,
marble, parquet and carpets.
• SET OF ACCESSORIES (10):
• accessory support (10a): to store the accessories and attach them to the body of
the stick.
• Dusting nozzle (10b).
• Nozzle for crevices (10c): to clean corners and slots, such as radiators, skirting
boards and blinds.
• upholstery nozzle (10D): to clean sofas, armchairs, upholstered chairs and
curtains.
CHARGING THE BATTERY
• make sure the appliance battery is low before recharging it.
• make sure the appliance is set to oFF before recharging it.
12
8c protective filter mesh
8D cyclone filter
8e charging contact
8F technical data
9. mini-vacuum oN/oFF switch and
recHargINg lIgHt
10. set of accessories
10a accessory support
10b dusting nozzle
10c crevice nozzle
10D upholstery nozzle

ASSEMBLY

ACCESSORIES

PREPARATION