Safety Instructions - Check Point Smart-1 205 Guía De Introducción

CHAPTE R 2
Mounting Smart-1 205 and Smart-1
210 in a Rack
In This Section:

Safety Instructions

Determining Space and Weight Requirements
Rack Mounting Hardware and Tools
Attaching the Ear Mount Brackets to the Appliance
Installing the Appliance in the Rack
These instructions show how to install Smart-1 205 and Smart-1 210 in a standard 19
inch (48.26 cm) rack (see specification EIA-310-D).
Safety Instructions
Before installing your appliance in a rack cabinet, review the following guidelines:
•
Make sure that the room air temperature is below 35°C (95°F).
•
Do not block any air vents. Normally, 15 cm (6 in.) of air space in the
rear and 5 cm (2 in.) in the front provides proper airflow.
• Install the appliances in the cabinet starting at the bottom and going
up.
•
Install the heaviest appliance at the bottom of the rack cabinet.
•
Connect the server to a properly grounded outlet.
•
Do not overload the power outlet when installing multiple devices in
the rack cabinet.
...............................................................................................
..................................................................
...................................................................
Smart-1 205/210 Appliances Getting Started Guide
..................................................
.........................................
19
20
21
22
22
| 19