Battery Indicator - Olympus DM-720 Manual Del Usuario

4 Indicator display area
[ ]: Play Scene
[ ]: Rec Scene
[ ]: Noise Cancel
[ ]: Voice Balancer
[ ]: Random
[ ]: Playback Range
[ ]: Repeat
[ ]: Equalizer
[ ]: Voice Playback
[ ]: Rec Level
[ ]: VCVA
[ ]: V-Sync. Rec
[ ]: Low Cut Filter
[ ]: Zoom Mic
[ ]: Mic Select
[ ]: Voice Detect

5 Battery indicator

[ ]: Ni-MH
[ ]: Alkaline
6 Possible recording time
7 Available free space
EN
4
Setup
Inserting the battery (Fig. 1)
Before using the voice recorder,
insert the battery in the battery
compartment of the voice recorder.
1 Press and hold the battery/card
cover lock button, and then slide
the battery/card cover to open.
2 Insert a AAA battery, making sure
its positive and negative terminals
are placed correctly.
a Insert the battery's negative
terminal first.
3 Slide the battery/card cover
completely closed.
Turning the power ON (Fig. 2)
1 While the voice recorder is turned
off, slide the POWER/HOLD
switch in the direction of the
arrow.
Selecting the battery setting
(Fig. 3)
1 Press the + or – button to select
the type of battery you inserted.
[Ni-MH]:
Select if you inserted an
Olympus nickel-metal hydride
rechargeable battery (model
BR404).
[Alkaline]:
Select if you inserted an
alkaline battery.
2 Press the `OK button to finalize
the setting.
Setting the time/date (Fig. 4)
1 Press the 9 or 0 button to
select the item to set.
2 Press the + or – button to change
the number.
• To change the setting of another
item, press the 9 or 0
button to move the blinking
cursor, then press the + or –
button to change the number.
3 Press the `OK button to finalize
the setting.
Setting the voice guidance
1 Press the + or – button to select
[On] or [Off].
[On]:
Voice guidance will be enabled.
[Off]:
Voice guidance will be canceled.
2 Press the `OK button to finalize
the setting.
Charging the battery by connecting
to a PC's USB connector (Fig. 5)
NOTE:
• Before charging the battery, insert
the rechargeable battery provided
and set [Battery] to [Ni-MH].
1 Start the PC.
2 Slide the USB connector slide lever
in the direction of the arrow.
3 After making sure the voice
recorder is stopped, connect the
USB connector to a USB port on a
PC.
4 Press the `OK button to start
charging the battery.
• When [Battery] is set to
[Ni-MH], [Press OK to start
charging] appears on the
display. Press the `OK button
while this message is blinking.