Data Transmission - Bosch PLR 30 C Manual Original

30 | English

Data transmission

Transmitting data to other devices
The measuring tool is fitted with a Bluetooth® module, which enables wireless data trans-
fer to certain mobile devices with a Bluetooth® interface (e.g. smartphone, tablet).
Information about the system requirements for a Bluetooth® connection can be found on
the Bosch website at www.bosch‑pt.com
When transmitting data by means of Bluetooth®, time lags may occur between the mobile
device and the measuring tool. This can be due to the distance between the two devices
or the measurement object itself.
Activating the Bluetooth® interface for transmitting data to a mobile device
To activate the Bluetooth® interface, press the Bluetooth® button (3) on the measuring
tool. Ensure that the Bluetooth® interface is activated on your mobile device.
The special Bosch app "PLR measure&go" is available to expand the range of functions of
the mobile device and to make data easier to process. You can download this from the
store for your mobile device type:
The connection between mobile terminal/device and measuring tool is established after
the Bosch application has started. If multiple active measuring tools are found, select the
appropriate measuring tool.
The connection status and the active connection are shown in the display (5) (a). If no
connection can be established within three minutes of pressing the Bluetooth® button
(3), Bluetooth® will automatically switch off to save the batteries/rechargeable batteries.
1 609 92A 4P0 | (18.01.2019) Bosch Power Tools