Publicidad
STEP 2C- PRIOR TO EXTENDING ARMS REMOVE ARM ASSEMBLY FROM WALL PLATE
Remove Arm Assembly by gently pulling lower section of Arm Assembly away from Wall Plate which will
allow for top portion of Arm Assembly to be lowered and moved away from Wall Plate.
Prior to extending arm：
Remove 2 Allen
Arm Assembly with included Allen
wrench.
Remove 2
of Arm Assembly with included
Allen wrench.
Note- 4
Allen
to reattach arm assembly to wall mount.
6
screws at top of
Allen
screws at bottom
screws will be used in Step 4
A1
P 7
Publicidad
