Important - Husqvarna ROYAL 43EL Manual Del Operador

Grassbox Assembly
Assembling the
Grassbox Screen
1. Fold the screen
sides
inwards.(D1)
2. Align the
matching tabs
and slots in the
back and sides of
the grassbox
screen and press
firmly
together.(D2)
3. The assembled
screen should
appear as
illustrated. (D3)
4. Lower the
assembled
screen into the
grass box,
aligning the tabs
with the slots in
the grassbox and
press firmly
together.
(D4) (D5)
D5
ASSEMBLY INSTRUCTIONS
D1
D2
D3
D4
5. Take the lid,
align the tabs
with the slots
and press firmly
together.(D6)
Fitting Fully Assembled Grassbox
to Lawnmower
1. Lift safety flap. Make sure the
discharge chute is clean and free
from debris.
2. Locate fully assembled grassbox
onto grassbox sill.
3. Fit the 2 location
studs on the
safety flap into
the 2 location
holes on the
grassbox lid and
ensure the
grassbox is
securely located.(E)

IMPORTANT

After fitting ensure no gap remains
between the safety flap and
grassbox lid.
Where grass collection is not required
you can use the lawnmower without
the grass collector.
Ensure the safety flap is fully closed
D6
E
4 - English