Abicor Binzel xFUME FLEX Instructivo De Servicio página 20

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners worldwide
can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
1.2 EU declaration of conformity
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Responsibilities of the user
2.3.1 Country-specific responsibilities of the user
2.4 Specific safety instructions
2.5 Safety instructions for the mains connection
2.6 Personal protective equipment (PPE)
2.7 Warning and notice signs
2.8 Emergency information
3 Product description
3.1 Technical data
3.2 Nameplate
3.3 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Transport and installation
6.2 Attaching the extraction hose
6.3 Establishing an electrical connection
6.4 Regulating the air volume flow
7 Operation
7.1 Control elements
EN - 2
EN-3 8 Putting out of operation
EN-3
EN-3 9 Maintenance and cleaning
9.1 Inspection intervals
EN-4 9.2 Replacing the filter elements
EN-4 9.2.1 Exchange pre-filter
EN-4 9.2.2 Exchange main filter
EN-4
EN-5 10 Troubleshooting
EN-5
EN-5 11 Disassembly
EN-6
EN-6 12 Disposal
EN-6 12.1 Welding dust
12.2 Materials
EN-6 12.3 Consumables
EN-6 12.4 Packaging
EN-7
EN-7
EN-7
EN-8
EN-8
EN-8
EN-9
EN-9
EN-10
EN-12
EN-12
EN-13
EN-14
xFUME FLEX
EN-14
EN-15
EN-15
EN-16
EN-16
EN-17
EN-17
EN-18
EN-19
EN-19
EN-19
EN-19
EN-19
BAL.0733.0 • 2020-07-10