Functional Description - Abicor Binzel xFUME FLEX Instructivo De Servicio

5 Functional description

4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk of transport
damage.
Goods-in inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have
Tab. 5 Transport
4.2 Storage
For ambient conditions for storage in a closed environment:
 Tab. 3 Ambient conditions for transport and storage on page EN-7
5 Functional description
Fig. 2
Functional description
The xFUME FLEX extraction system forms part of a welding, cutting and grinding system. Harmful fumes are produced during
the welding, grinding, and also during the laser and plasma cutting processes. The internal filters of the welding fume
extraction system extract and clean the harmful fumes. The welding fumes are extracted via the extraction hood and the
connected extraction hoses and then fed through filter elements. In the standard configuration, the extraction system is
equipped with a pre-filter and a main filter. Large particles are removed by a pre-filter. Fine particles are then removed by
the main filter. The particles and dust adhere to the surface of the filter material, which causes the intake pressure on the fan
to increase. The cleaned air is then returned through an exhaust air grille.
The welding fume extraction system can operate a flexible extraction arm with a length of 2, 3 or 4 metres.
The device corresponds to the welding fume separation class H13.
EN - 8
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last carrier immediately.
Retain the packaging for potential inspection by the carrier.
questions concerning packaging and safety during shipment, please consult your supplier,
carrier or carrier.
xFUME FLEX
BAL.0733.0 • 2020-07-10