EDM Product 07181 Manual Del Usuario página 20

07181
REF.
Step Press button:
1 WEEK (3 sec.)
2 SET
3 + or –
4 OK
5
SET
6 OK
7 SET
8 + or –
9 OK
10 EDIT(ED)
11 + or –
OK
12
TEMP
13
+ or –
14
15 OK
16 TIME ON
17 + or –
18 OK
19 TIME OFF
20 + or –
21 OK
Timer setting(s) is/are entered; the ambient temperature will appear on the display after three (3) seconds.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
The display shows:
UU flashes
ON/OFF flashes
H1 flashes
UU
01 or 99 flashes
UU
U1 flashes
U1 to U7 flashes
The selected day
01 flashes
+ or –
The selected number
HP flashes
+ or –
The selected temperature
HE flashes
+ or –
The selected start time
HF flashes
+ or –
The selected stop time
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Explanation:
Select day of the: 1 = Monday, 2 = Tuesday, etc.
Select:
+ = ON: Timer on (on the set times, the heater
will automatically switch on/off)
– = OFF: Timer off (on the set times, the heater
will not automatically switch on/off)
Select the correct hour
Select:
+ = 01: All timer settings are executed only once
– = 99: All timer settings are executed endlessly
[see Attention (a)].
Select the correct minute
Select the day of the week
(1 = Monday, 2 = Tuesday, etc.) for which you
want to make a timer setting.
You should give a number (1 to 4) to this day,
because you can only make four (4) timer
settings per day. The sequence of the
numbering is not. Important [see Attention (b)].
Set the desired temperature (40°C to 70°C).
The default setting 45°C is70°C°C.
Set the desired start time from 00.00 to 23.00
[see Attention (c)].
Set the desired stop time from 00.00 to 23.00
[see Attention (c)].