Epson DM-D500 Manual De Usuario página 7

(*1) The "Y-connection enable" is set when a TM printer with no modular jack for the DM-D is connected
with this product, using one COM port to connect both TM printer and DM display. In this case, an
optional DM-D stand (DP-501) and a connecting cable are required. In the cases other than above,
choose "Y-connection disable" (default setting).
(*2) This function can select whether or not you perform self test when turning on the power.
(*3) When selecting "20 column and 2 line mode," this product can be used like the DM-D110/210. In this
case, the graphic display and the original functions for the DM-D500 cannot be used, but when
selecting "256 x 64 dots mode," they can be used.
(*4) When setting to "Printer is selected," data is sent to the TM printer, but is not displayed on the display.
When setting to "Display is selected," data is displayed on the display but is not output from the TM printer.
The selection can be changed using <ESC=> command.
(*5) Stay at OFF setting.
Specifications
Display type
Total number of dots
Number of characters
displayed
Display color
Brightness
Character classes
Character composition
Character size
Interface Standard
Connector
Reliability
Power supply voltage
Power consumption
External DM-D500
dimensions
/ Weight
DP-501
(Mass)
DP-502
Tilt angle
Horizontal rotation angle
Power supply
Fluorescent tube display
256(W) x 64(H) dots
40 characters (20 columns × 2 rows, 5 × 7 dot matrix)
32 columns × 4 lines maximum (when Font A is used)
42 columns × 8 lines maximum (when Font B is used)
16 columns x 4 lines maximum (when Chinese character is used)
20 columns x 2 lines (mode for the DM-D110/210 emulation)
Green (505 nm)
2
300 cd/m
Alphanumeric: 95 characters
International characters: 37 characters
Graphic characters: 128 characters × 12 pages (including two user-
defined pages)
Chinese character
Font A 8 x 16 dots
Font B 5 x 7 dots
Chinese character16 x 16 dots
FontA : 4.4 × 8.8 mm {0.17 × 0.35"}
FontB : 3.3 x 4.4 mm {0.13 × 0.17"}
Chinese character : 8.8 x 8.8 mm {0.35 × 0.35"}
RS232C Compliant
RJ-45
30,000 hours (a half-value period of the brightness)
DC 11.4 V ~ 48 V
Approx. 6 W
213 (W) × 51 (D) × 83 (H) mm / Approximately 460 g
{8.39 (W) × 2.01 (D) × 3.27 (H)" / Approximately 1.01 Ib}
200 (W) × 118 (D) × 65 (H) mm / Approximately 440 g
{7.87 (W) × 4.65 (D) × 2.56 (H)" / Approximately 0.97 Ib}
78 (W) × 164 (D) × 260 (H) mm / Approximately 264 g
{3.07 (W) × 6.46 (D) × 10.24 (H)" / Approximately 0.58 Ib}
Maximum 48° (4 steps)
DP-501: Maximum 90°
DP-502: Maximum 330°
Supplied by the system
Specification
DM-D500 User's Manual 5
English