Maintenance And Cleaning - Aspes ACH1561 Manual De Instrucciones

Figure 1
WARNING! Do not use any of the materials and metals that are
not recommended by the manufacturer during defrosting. You may
damage the refrigerant components. Do not use any other item to
scrape frost than the frost-scraper apparatus provided with your
product. Otherwise, if you use sharp, pointed or metal-like object,
you may damage the inner wall of the freezer. Besides, misuse of the
product may result in gas leakage. Never use water or any other liquid to
remove the frost in your freezer and never clean it with steam cleaners.
It may damage your freezer or cause electric shocks. Never use any of
the heating sources (such as electrical heater, heater, etc.) to expedite
the defrosting process on your freezer. Such heaters may damage the
plastic sections of the freezer. Take a good care while placing frozen,
boned foods or hard covered materials which are suitable for use into
the product so that these elements do not damage the interior.

MAINTENANCE AND CLEANING

• Perform maintenance and cleaning at least once a year to get a
good efficiency from your chest freezer.
• Before cleaning, remove the power cord of the freezer from the
wall-socket.
• Make sure that your wear protective gloves during the maintenance
and cleaning. This will protect you against injuries.
• Never use domestic cleaning products and abrasive, scratching
materials as cleaning agents. Never use pressurised or flowing water
for washing.
• Never wash inner and outer surfaces of your product. It may damage
your freezer or cause electric shocks.
Figure 2
22
Figure 3