Sportcraft 92726-SR Instrucciones De Armado página 9

Tabla de contenido

Publicidad

FIG 3
4. Attach the Low Side Aprons (#2) and Low End Aprons
(#6) to the Aprons by using two Bolts (#12), two Washers
(#11) and one Connect Board (#5) Per Point. Please
note that there have 4 Points at Lower Sides Aprons
and 2 Points at Low End Aprons.
FIG 4
5. Slide the Apron Corners to the Side Apron and End
Apron and then using eight Screws (#13) Per apron
corner. Now you have to turn over the table in this step.
Please Make Sure have at least four strong adults to do it.
THIS STEP REQUIRES FOUR OR
MORE ADULTS. VERY CAREFULLY
TURN THE TABLE OVER AND SET
IT ON ITS LEGS. BE CAREFUL,
THE TABLE IS HEAVY.
ADVERTENCIA
ESTE PASO REQUIERE CUATRO O
MÁS ADULTOS. MUY ATENTAMENTE
GIRE LA MESA Y FIJE EN SUS PATAS.
TEN CUIDADO, LA MESA ES PESADA.
FIG 3
4. Fije los Delantal lateral inferior(#2) y los Delantal Extremo
inferior (# 6) a los delantales usando dos Pernos (# 12),
dos Arandelas (# 11) y una tablero(# 5) por punto. Por favor
tenga en cuenta que tiene 4 puntos en los lados inferiores
delantales y 2 puntos en delantales de extremo inferior.
FIG 4
5. Deslice las esquinas (#19) hacia el delantal inferior y el
extremo inferior y luego usando ocho tornillos (#13) por
esquina(#19). Ahora debes voltear la mesa en este paso.
Asegúrese al menos cuatro adultos fuertes para hacerlo.
8

Publicidad

Tabla de contenido
loading

Tabla de contenido