Signals; Automatic Operation - Gewiss RESTART RD PRO 90 Serie Manual Del Usuario

SIGNALS

Signals
LH LED RH LED
OFF
(wait)
(fixed)
N.B.: before moving the slide left, cutting in the device, the associated switch in position "I" must be closed.
Key
LED off
LED blinking
LED on (wait)
LED on (fixed)
Front of device
Contact
MANUAL OPERATION
OFF
OFF

AUTOMATIC OPERATION

OFF
/
ON
ON
ON
Reset device not cut in.
System powered up.
Reset and autotest device not cut in.
Switch tripped or opened intentionally.
Reset device cut in.
System powered up.
Reset device in system check or
reclosing phase.
System not powered up.
Reset device in wait due to permanent
or temporary system fault downstream.
System not powered up.
Reset device blocked due to failure of
the third close reset attempt.
System not powered up.
20
Condition