6: Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press
the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set within 1-24 hours and the timing value is adjusted upwards
or downwards by one hour.
7:Sleep Mode:
In the cooling/Heating Mode,Press the UP and Fan Key to turn on the sleep
mode,then the unit will work on Energy-Saving and quiet type.
Note: Can not turn on the sleep mode in the dehumidifying or Fan mode!
Please use the remote control to set the sleep mode only, can not set on the Control
Panel.
II. Operating Instructions of the Remote Control
Operation interface of the remote control is as follows
Single cold remote control
Instructions of key operation of the high-quality remote control are as follows:
1. Power: Press
2. Mode: Press
heating (single cold with no such function) mode.
3. Up: press
the key to turn on or turn off the machine.
the key to switch between cooling, air supply, dehumidification and
the key to increase temperature and timing set value.
Page: 10/15
Remote control with heating function