Product Description - Chauvet Hurricane 1302 Guía De Referencia Rápida

Product Description

The Hurricane 1302 is a compact water-based fog machine that emits thick bursts of fog to enhance light shows. It fills
large rooms quickly and can emit a continuous output. The Hurricane 1302 works with both CHAUVET DJ High
Performance Fog Fluid (FJU) and High Density Fog Fluid (HDF).
Overview
Carrying Handle
Power
Switch
Fuse
Holder
Power In
Remote
Connection
AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC,
50 Hz, depending on the specific model.
To eliminate wear and improve its lifespan, during periods of disuse completely disconnect the
product from power via breaker or by unplugging it.
Fuse Replacement
120 V:
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
230 V:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Hurricane 1302 QRG Rev. 1
QUICK REFERENCE GUIDE
Fluid Tank
Safety Loop
Fog Output
Nozzle
120 V
Version
Fluid Level
Indicator
Low Fluid
Indicator
Power
Switch
Manual Fog
Button
Power In
Fuse Holder
Remote
Connection
Fog Fluid
Line
230 V
Version
Fluid Level
Indicator
EN
2