Indel B 30 EASY Instrucciones De Uso página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
SAFE 30 E A SY
INSTRUCTIONS FOR USE
The Safe, after the installation, appears to the user with the Double code system already set by the
Manufacturer.
Personal code (of 4-6 digits, for ordinary use) and Master code (of 6 digits, for emergency openings).
Adhere to the following instructions for Ordinary use.
SAFE CLOSURE
Enter a Personal code (from 4 to 6 digits) and press the LOCK key (#). The display will show the message
"CLOSE". When the door is closed, the display will show the message "CLOSED" and subsequently the
Personal code entered, as a memorandum to the user.
In the front panel of the Safe, a short illustrated sequence is reported describing the door opening and
closure procedures.
SAFE OPENING
GUEST LOCKING
• Key in any 4-6 digits numbers as the password.
• Press #LOCK .
• Will display "CLOSED" after locking.
GUEST UNLOCKING
• Just need to key in the last guest password.
• Will display "OPENED" after unlocking.
WARNING
The safety box will automatically lock for system protection for 15 minutes in case consecutively FOUR times
of wrong password input
MANAGEMENT PASSWORD INSTRUCTION (MASTER CODE)
Management password is available for unlocking in case the guest forgets the password.
UNLOCKING WITH THE MANAGEMENT PASSWORD
• Input the current management password.
• Monitor shows "-OPEN-", then "OPENED".
The ex-factory initial management password is 848711. It can be changed according to management needs.
CHANGE THE MASTER CODE
• With the door open, key in the programming code for the master code revise **1967#.
• The display will show NEW.
• Key in the new master code composed by 6 digits and press # to confirm.
• The display will show AGAIN.
• Key in again the new master code composed by 6 digits and press # to confirm.
• The display will show DONE and the new Master Code is active.
WARNING
We recommend changing the default Master Code as the same code is set forl the safes in the factory.
Once you have changed the Master Code, make a note of the new Code and keep it in a safe place.
SAFE_30_EASY_20191122
14

Publicidad

Tabla de contenido
loading

Tabla de contenido