Powermate ® Care; Belt Changing And Agitator Cleaning - KENMORE ELITE 125.21814610 Manual De Uso

Always follow all safety precautions when performing maintenance to the PowerMate
WARNING
Electrical Shock Or Personal Injury Hazard
$OZD\V WXUQ Rç DQG XQSOXJ YDFXXP
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.

BELT CHANGING AND AGITATOR CLEANING

TO REMOVE BELT
1. RemoYH pRRU
Brush
brush from the
Release
®
PowerMate .
Pedal
®
3. Turn PowerMate
right side up.
4. Loosen the rear
latches located
below the pedals.
POWERMATE
®
2. Turn PowerMate
upside down and
remove three (3)
screws.
5. Grasp cover
by rear and pull
up to remove it
from base.
- 22 -
®
CARE
6. Unscrew two (2)
agitator cover
screws and remove
agitator cover.
8. Check and clean end cap areas. See
AGITATOR ASSEMBLY (page 23) for picture
of complete agitator assembly.
®
.
7. Lift agitator
assembly out
and remove
worn belt.