Yakima Cargo Box Hanger Manual De Instrucciones página 2

locate tWo Wall
stUDs 32" apart
marK holes
attach enD caps
open box
attachments
1033379A-/6
Determine bracKet height from floor
Measure and mark both studs.
Drill
Drill two 3/16" diameter
holes, 2 1/2" deep.
install bar
• Set bar into brackets.
• Secure with very tiny
set screws.
hang box
• Lift box vertically and hook
attachments onto bar.
• open the Box and
tighten the hardware.
always keep center of gravity
between hangers and do not exceed
200 lb. weight limit.
cargo box must
hang high enough
to avoid contact
with floor.
attach bracKets
Attach bracket with washers and lag
bolts using 7/16" wrench or socket
drive.