Mychanic 52602 Instrucciones De Operación página 5

• AC Charge:
-
-
-
-
• DC Charge:
-
-
-
-
BATTERY CARE AND HANDLING
• DO NOT disassemble your work light or attempt to remove the battery.
DO NOT puncture or otherwise damage the battery. If battery becomes damaged, properly
•
dispose of work light.
• DO NOT use any charging means other than those provided. The supplied AC to DC 12V
500mA charging adapter and 12V DC vehicle charging cords are made specifically to charge
the built-in sealed battery.
SPECS
Battery:
LEDs:
Run Time:
Optimum Charging Temperature:
WARRANTY - UNITED STATES ONLY
ONE YEAR LIMITED WARRANTY
This product is warranted to be free of defects in materials or workmanship for one year from the date of
purchase for the original purchaser. Proof of date of purchase will be required. The manufacturer is not re-
sponsible for any consequential or incidental damages arising from the breach of this or any other warranty,
whether express, implied or statutory. Some states do not allow the exclusion or limitation of consequential
or incidental damages, so the above exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
All manuals and user guides at all-guides.com
Insert the AC charging plug into the charging jack. Use only the supplied AC adapter.
Plug the transformer end of the AC adapter into an appropriate AC outlet.
The red LED indicator light will illuminate to indicate that the work light is charging.
The green LED indicator light will illuminate when fully charged (about 7 hours).
Insert the DC charging plug into the charging jack. Use only the supplied DC adapter.
Plug the other end into the 12V socket of your vehicle.
The red LED indicator light will illuminate to indicate that the work light is charging.
The green LED indicator light will illuminate when fully charged (about 6.5 hours).
7.4V 1800mAH Li-ion battery
27 pcs super bright 5630 SMT LED
High Mode: approx. 3.5 hours
50˚ F (10˚C) to 104˚F (40˚C)