Led Indicators - Axis P7224 Video Encoder Blade Guia De Instalacion

AXIS P7224 Video Encoder Blade
Specifications
To find the latest version of the product's datasheet, go to axis.com > [product] > Support &
Documentation.

LED Indicators

LED Color
Status Green
Amber
Red
Power Green
Amber
Buttons
Control button
For location of the control button, see Product overview on page 8 .
The control button is used for:
• Resetting the product to factory default settings. See page 10.
Restart button
Press the restart button to restart the product.
Connectors
Bus connector
The bus connectors are the physical interfaces to the video encoder chassis that provide power,
network, RS485, and I/O terminal connections.
BNC connector
Each video input is terminated using a coax/BNC connector.
Connect a 75 Ohm coaxial video cable; the recommended maximum length is 250 m (800 ft).
Indication
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
12