Envirolite EV1240L3-325 Manual Del Usuario página 4

Installation
1
Mounting the hardware

Align the fixture pan (A) over the outlet
box.

Mark the location of the keyhole slots of
the fixture pan (A) onto the ceiling.
Remove the fixture pan (A) from the
ceiling.

Drill a 1/4 in. (6.4 mm) hole at the
narrow end of each keyhole slot
marking on the ceiling.

Carefully hammer an anchor (CC) into
each drilled hole.

Screw an anchor screw (DD) into each
anchor (CC), but allow a small portion
of the anchor screw (DD) to remain
away from the ceiling.
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Pull the power supply wires out from
the outlet box.

Connect the black supply wire to the
black fixture wire using wire nuts (BB).

Connect the white supply wire to the
white fixture wire using wire nuts (BB).

Connect the fixture ground wire and
the supply ground wire together using
a wire nut (BB).

Wrap all wire connections with
electrical tape for a more secure
connection.
CC
BB
A
4
A
CC
DD