Asus 4G-AX56 Guia De Inicio Rapido página 7

NOTES:
• Ensure that the Mobile Broadband LED lights up before
configuring 4G-AX56 with Mobile Broadband. Turn off the 4G-
AX56 and check the fitting of your Nano SIM card if otherwise.
• 4G-AX56 can be configured to accept either Mobile Broadband
or Ethernet WAN source. Load Balance and Fail Over is also
supported between the two sources if both sources are
available.
• 4G-AX56 automatically detects the ISP connection type at
default state. During the QIS (Quick Internet Setup) process,
you may be asked to key in the PIN code of the Nano SIM card
installed and the APN (Access Point Name) information of the
mobile carrier in order to receive connection.
Mobile Broadband LED indications
LED
Mobile
Broadband
LED
WAN (Internet)
LED
Power
5GHz
2.4GHz
White Connected to 4G mobile broadband
Cyan Connected to 3G mobile broadband
Red Cannot connect to mobile broadband
Off No Nano SIM card detected
White Wired broadband is online
Red Wired broadband is offline
White 4G-AX56 is powered on
Off 4G-AX56 is powered off
White 5GHz WiFi is enabled
Off 5GHz WiFi is disabled
White 2.4GHz WiFi is enabled
Off 2.4GHz WiFi is disabled
Indications
7