Zen & Pur KALY Guia Del Usuario página 21

When handling hot liquids, use extra caution, because they may release steam or may splash and scald the
user. Before pouring hot liquids into the blending container and blending them, let them cool to at least 40°C.
It is prohibited to pour boiling water into the mixing containers and water above 60°C in the glass containers,
otherwise the warranty will be void.
Do not leave the appliance continuously operating for more than 2 minutes. Before restarting, let it cool for at
least 2 minutes. When processing harder foods or thicker liquids, do not leave the appliance running for more
than 1 minute.
The appliance has a thermal fuse that protects the motor from damage if it is subjected to excessive stress. If
the appliance shuts off automatically due to motor overload, unplug it, and let it cool for at least 15 minutes.
Then you can operate the appliance again.
If food sticks to the blade unit or to the wall of the blending container, turn the appliance off and unplug it.
Make sure that the blade unit has stopped turning. Remove the container set from the motor unit and turn
it so that the blade unit points upward. Remove the blade unit. Use a plastic spatula to clean the blade unit
and container wall. Put the blending container and the blade unit together again and attach them back to the
motor unit. Plug the cord in and continue blending.
When handling the blade unit, use extra caution when removing it from the blending container, so that it does
not cause injury. The blade unit's edges are sharp.
Do not run the appliance empty. Improper use of the appliance may shorten its service life and cancel the warranty.
Always turn the appliance off and unplug it when it is not in use, when leaving it unattended, before assembling
or dismantling it, when changing accessories, cleaning it or moving it.
Before removing the blending container from the motor unit, make sure that the motor unit is turned off and
unplugged, and that the rotating parts have stopped.
Do not submerge the motor unit or power cable in water or any other liquid or wash these parts under running water.
Make sure that the power cable does not come into contact with moisture. Do not place heavy objects on the
power cable. Make sure that the power cable does not hang over the edge of a table or touch a hot surface.
Do not unplug the appliance by pulling on the power cable. This may damage the power cable or socket.
Unplug the cable by pulling the electrical plug.
If the power cable is damaged, have it replaced by a qualified service facility. It is forbidden to use the
appliance with a damaged power cable or plug, or to replace it yourself.
Do not use the appliance if it is not working right or shows any signs of damage.
To avoid hazards, do not repair the appliance yourself or modify it in any way. All repairs must be done by an
authorized service facility. Tampering with the appliance may void the warranty.
The motor unit cannot be washed in the dishwasher, under penalty of cancellation of the warranty.
21