Ledwood LD-Q11-TWS Manual Del Usuario página 4

a call.
5 - Vocal assistant: Long press the multi-func-tion button for
3 seconds.
6 - Next track: Press the multi-function button twice.
7 - Play / pause: Briefly press the multifunction key.
8 - Switching off: Press and hold the multifunction key until
the LED indicator flashes red. A voice message announces
«POWER OFF».
9 - Charging the charging unit: The LED indicator on the char-
ging unit flashes blue when the battery is low. The LED in-
dicator flashes red during charging and stays lit red when
fully charged. When the charging unit is fully charged, it
can charge the earphone 4 to 5 times.
10 - Charging the earphone: The LED indicator stays lit red
during charging and turns off when fully charged.
WARNINGS
1 - Do not overuse the earbud, do not subject it to high pres-
sure and keep it away from heat and humidity.
2 - Keep it at a distance from the Wi-Fi signal, router or any
other high-frequency transmission to avoid a loss of the
Bluetooth signal.
3 - Ensure that you use the earbud within the Bluetooth range
and make sure that there is no obstacle between the
connected devices.
4 - Use the Bluetooth earbud to connect to any device equip-
ped with Bluetooth.
PRESENTATION
4