Axis Q16 Serie Guia De Instalacion página 10

AXIS Q16 Network Camera Series
The product can be used with the following browsers:
TM
• Chrome (recommended), Firefox
TM
• Chrome (recommended) or Safari
TM
• Chrome or Firefox
To find out more about how to use the product, see the User Manual available at axis.com
If you need more information about recommended browsers, go to axis.com/browser-support
How to adjust focus and zoom
If the camera is mounted so that you cannot look at the image and access the lens at the same
time, use the Focus Assistant, see .
1. Go to the Image tab in the product's webpage.
2. Adjust Zoom.
3. Click Autofocus.
How to replace the lens
1. Stop all recordings and disconnect power from the product.
2. Disconnect the lens cable and remove the standard lens.
3. Attach the new lens and connect the lens cable.
4. Reconnect the power.
5. Go to the Image tab in the product's webpage and select the P-Iris lens you have
installed.
Note
If you use a DC iris lens, select Generic DC Iris.
6. Adjust the zoom and focus.
How to adjust focus and zoom for optional lenses
If the camera is mounted so that you cannot look at the image and access the lens at the same
time, use the Focus Assistant, see .
1. Go to the Image tab in the product's webpage.
2. Loosen the zoom and focus pullers on the lens by turning them counter-clockwise. See
Product overview.
3. Move the pullers to set zoom and focus and check the quality of the image in the image
window.
® ®
, Edge
®
with OS X
®
with other operating systems.
10
®
, or Opera with Windows
®
®