Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the motor support (8) to the central rod (5) using M6 bolt (13), M6 flat washer (19), M6 spring lock washer (21), and
7
M6 nut (15), as shown in figures 13 and 14. The hardware must be fastened such that the height of the motor support can
be adjusted at a later stage.
Install the central rod (5) to the cross beams (6 & 7) using the M8 bolts (12), M8 flat washer (18) and M8 spring lock washer
8
(20).
After attaching the central rod to the legs, all hardware shall be tightened using appropriate size wrenches. See figure 16. The
9
height of the motor support bracket must now be adjusted, such that the motor rests on the upper motor support. See figure
17.
Fig. 13
Fig. 15
Fig. 16
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
5-TON ELECTRIC LOG SPLITTER STAND AND TRAY
Assembly Instructions
Fig. 14
Fig. 17
7
Publicidad
