Retrograde with Day Sweep
(Ronda 7004 .N)
Weekday setting, date and time setting
1 . First unscrew the crown to position I .
2 . Pull crown out to position III .
3 . Turn crown clockwise to set the previous weekday .
4 . Push crown in to position II .
5 . Turn crown counter-clockwise until the previous day's date
is displayed .
6 . Pull crown out to position III .
7 . Turn hands clockwise until the correct date is shown in the
date window .
8 . Continue to turn crown clockwise to set correct am/pm time .
9 . Return crown to position I .
10 . Screw the crown inwards .
All manuals and user guides at all-guides.com
Crown
4
Chronograph 1 Eye, Big Date
(Model 5010 .B)
1
Hour hand
Setting the time
1 . Pull the crown to position III (the watch stops) .
2 . Turn the crown until you reach the correct time .
3 . Push the crown back to position I .
Setting the date
Center stop-second
1 . Pull the crown to position II (the watch continues to run) .
2 . Turn the crown until yesterday's date appears .
3 . Pull crown out to position III (the watch stops) .
4 . Turn the crown until the correct date appears .
5 . Continue to turn crown until correct time appears .
2
6 . Push crown back to position I .
Chronograph
•
The minute and hour counter measures 30 minutes per rotation
Small minute counter
and 12 hours per rotation .
•
Small hour counter
The center stop-second measures 60 seconds per rotation.
Minute hand
Pusher A
I
II
III
Crown
30
12
9
3
6
Pusher B
15
Pusher A
I
II
III
Crown
30
12
9
3
6
Pusher B
15
5