Oh!FX BUBBLE STORM Manual De Instrucciones página 5

good quality bubble liquid. The bubble liquid must exceed the level of the lower rings of
the bubble production wheels (7), and at same time may not exceed the maximum level
indicated in relief on the fl uid container.
3. Turn On the machine using the switch button (4)
4. You can regulate the power of the rear and front fans as well as the speed of the bubble
production wheels thanks to its regulators (10) (11) (12). Regulators of the rear fans (10)
and for the speed of the wheels (12) aff ect the amount and size of the bubbles produced.
Whereas the regulator of front fans (11) aff ect the distance that the bubbles will achieve.
COMMENTS
• Each bubble liquid has specifi c and unique properties, performance and behave diff erent.
But thanks to the possibility of regulation on the diff erent parts of the BUBBLE STORM
machine, it allows to optimize and get the maximum performance of every bubble liquid
used.
• Alternatively, you can also control and operate the bybble machine at a distance. To do
this, let the machine at ON position from the switch (4) and activate it from any control
sytem you may use (eg: 1 CHANNEL FX PUSHER, 1 CHANNEL DMX SWITCH, etc.).
If you want to control several machines at the same time, simply connect the machines
linking them with a powercon cable male-female using the Power output connector (2)
from the 1st machine to the Power Input connector (1) of the 2nd unit, and so on.
• To empty the bubble fl uid container (6), place a container or bucket under the level of the
drain valve (5) and open it to recover any excess bubble fl uid.
• After its use, it is advisable to fi ll the bubble fl uid container (6) with water to rinse it. Open
again the drain valve (5) to empty the container. Clean then machine with a damp cloth.
GENERAL CAUTION FOR BUBBLE STORM MACHINE
BUBBLE STORM machine has been designed for the described purpose. Any other use
diff erent from the written will disclaim Oh!FX (CONFETTISHOTS SLU) of all liability and
warranty.
• Use only the consumables intended for that specifi c use, and duly certifi ed.
• In case of malfunction, do not attempt to disassemble the machine and contact the
distributor or manufacturer. Any manipulation may exclude the warranty
• Do not wet the machine. To clean it, use a damp cloth and dry it immediately.
• Only one adult and qualifi ed person must manipulate the machine.
5
INSTRUCTION MANUAL