Festool TOPROCK BT 20 Manual página 9

is brought back in range, the
Bluetooth connection will be re-estab­
®
lished automatically. During this interrup­
tion, no other mobile device will be able to
connect to the TOPROCK BT 20.
– If the TOPROCK BT 20 does appear in the
list of Bluetooth
®
not actually possible, and it must be
deleted from the list of Bluetooth
The TOPROCK BT 20 will then have to be
paired via Bluetooth
– The effective operating range between the
paired devices is up to 50 m (164.04 ft). Any
obstructions between the devices may
reduce the range.
– The strength of the Bluetooth
may vary depending on the paired mobile
device. Before pairing to the TOPROCK
BT 20, always check the Bluetooth
tion on the mobile device.
Detecting devices already paired
Once the TOPROCK BT 20 has been paired with
a mobile device once, this will be saved in the
TOPROCK BT 20 and automatically recognised.
The TOPROCK BT 20 will always try to connect
to the most recently paired device automati­
cally. It can save up to eight paired devices. If
this number is exceeded, the least recently
paired device will be overwritten and will no
longer be automatically recognised. If the most
recently paired device is no longer available,
the TOPROCK BT 20 will try to connect to the
next most recent device and so on.
Clearing the memory
► Switch on the machine.
► Press and hold the Bluetooth
for more than seven seconds.
A short signal sounds and all the devices previ­
ously saved to the TOPROCK BT 20 are deleted.
► Switch off the device.
3.2 Pairing two TOPROCK BT 20 devices
A maximum of two TOPROCK BT 20 devices can
be connected up via Bluetooth
(true wireless stereo) function. Music can then
be played over two speakers.
The first TOPROCK BT 20 must be connected to
a mobile device.
► If not already paired, pair the TOPROCK
BT 20 with a mobile device; see section
► Press and hold the Bluetooth
for two to three seconds until the LED on
devices, a connection is
devices.
®
once more.
®
connection
®
func­
®
button [1-7]
®
using the TWS
®
button [1-7]
®
the Bluetooth
blue alternately.
► Switch on the second TOPROCK BT 20.
► Also press and hold the
Bluetooth
TOPROCK BT 20 for approx. two seconds
until the LED on the Bluetooth
flashes red and blue alternately.
After a few seconds, both TOPROCK BT 20
devices are successfully connected. Two short
signals sound and the LED on the
button [1-7] on the first device
Bluetooth
®
lights up blue continuously. The LED on the
button [1-7] on the second device
Bluetooth
®
lights up purple continuously.
Setting up the speakers
The TOPROCK BT 20 is equipped with four
speakers. Each of the two pairs of speakers
plays one audio channel.
If two TOPROCK BT 20 devices are connected
up, one of the following three playback options
can be selected:
Option 1
TOPROCK 1 TOPROCK 2
Option 2
TOPROCK 1 TOPROCK 2
Option 3
TOPROCK 1 TOPROCK 2
3.1 .
button [1-7] flashes red and
®
button [1-7] on the second
®
®
Both TOPROCK BT 20
devices play back the
right and left audio
channel (default
setting).
Feedback: The LEDs
flash white three
times.
TOPROCK 1 plays the
left audio channel
and TOPROCK 2
plays the right audio
channel.
Feedback: The LEDs
each flash white
three times.
TOPROCK 1 plays the
right audio channel
and TOPROCK 2
plays the left audio
channel.
Feedback: The LEDs
each flash white
three times.
English
button [1-7]
9