JCB 18AG Instrucciones De Funcionamiento página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 95
Maintain a firm grip on the power
m
tool and position your body and
arm to allow you to resist kickback
forces. Always use auxiliary handle, if
provided, for maximum control over
kickback or torque reaction during
start-up. The operator can control torque
reactions or kickback forces, if proper
precautions are taken.
Never place your hand near the
m
rotating accessory. Accessory may
kickback over your hand.
Do not position your body in the
m
area where power tool will move if
kickback occurs. Kickback will propel
the tool in direction opposite to the wheel's
movement at the point of snagging.
Use special care when working
m
corners, sharp edges etc. Avoid
bouncing and snagging the accessory.
Corners, sharp edges or bouncing have a
tendency to snag the rotating accessory and
cause loss of control or kickback.
Do not attach a saw chain
m
woodcarving blade or toothed saw
blade. Such blades create frequent
kickback and loss of control.
JCB-18AG
Instruction & User Manual
9

Publicidad

Tabla de contenido
loading

Tabla de contenido