Installation - Klarstein 10031996 Manual Del Usuario

INSTALLATION

Step 1
Please check if the carton of hood is
OK,then open the carton to confirm if the
spare parts is complete.
Step 3
Adjust the direction of hood outlet
according to the kitchen requirement,then
install the exhaust pipe.
Step 2
Take out spare parts and foam,then take
out the hood to put on the flat desk to
avoid fallen.
Step 4
Open the guide plate,take out the filter
net and take off 6 pcs screws,take out
guide plate and pluck and wire
connected with switch and LED light.
EN
23