Cata Purifyer Instrucciones Para La Instalación, El Uso, El Mantenimiento página 35

To reduce the risk of fire, electric shock, or injury
• Before you connect the appliance, ensure that the voltage
indicated on the appliance corresponds to the local power
voltage.
• Suitable for dry locations ONLY. Do not use outdoors or on
wet surfaces and do not expose to water or rain.
• Do not handle any part of the plug or appliance with wet
hands.
• Do not operate any appliance with a damaged cable or plug.
Discard the appliance or return to an authorised service
facility for examination and/or repair. If the supply cable is
damaged it must be replaced by the manufacturer in order
to avoid a hazard.
• If the purifier is not working as it should, if it has received a
sharp blow, if it has been dropped, damaged, left outdoors,
or dropped into water, do not use and contact Customer
Service.
• Do not cover cable with throw rugs, runners or similar
coverings. Arrange cable away from traffic area and where
it will not be tripped over.
• Do not unplug the purifier by pulling on the cable. To
unplug, grasp the plug of the purifier, not the cable. The
use of an extension cable is not recommended.
• Do not block the air inlet and outlet with objects. Do not use
with any openings blocked; keep free of dust, lint, hair, and
anything that may reduce airflow.
• Make sure that foreign objects do not fall into the appliance
through the air inlet or outlet.
• High voltage is used inside the device to generate plasma. It
is therefore essential to unplug before installation, cleaning
and maintenance.
• Do not use any cleaning agents or lubricants on this
appliance.
• Turn off all controls before unplugging.
35