EN
PROFESSIONAL PISTON COMPRESSOR NEBULISER
1 Piston compressor
2 Power cord
3 ON/OFF Switch
4 Vial pressure display gauge
5 Vial pressure regulator
6 Air connector
Dear Customer, this nebuliser is a high quality device for inhalation therapy for asthma, chronic bronchitis, and other respiratory
illnesses. This medical device generates aerosols with variable characteristics to adapt to the patient's respiratory pathology
and generating a medicinal mist of particles that are small enough to reach even the deepest regions of your lungs and be of
maximal benefit.The operation and usage of the device is very straightforward. All common liquid medication can be used for
inhalation therapy.Please read through these instructions carefully so that you understand all functions and safety information.
We want you to be happy with your LTK170 product. For any further questions you may have, please ask your chemist or
usual retailer.
IMPORTANT SAFETY INSTRUCTIONS
This device may only be used for the purposes described in this booklet. The manufacturer cannot be held liable for damage
caused by incorrect application. This device is not suitable for anaesthesia and lung ventilation.This device should only be used
with original accessories as shown in these instructions. Do not use the device if you think it is damaged or notice anything
unusual. Never open the device. This device comprises sensitive components and must be treated with caution. Observe the sto-
rage and operating conditions described in the «Technical Specifications» section. Protect it from: - water and moisture - extreme
temperatures - impact and dropping - contamination and dust - direct sunlight - heat and cold. Only use the medication prescri-
bed for you by your doctor and follow your doctor's instructions with regard to dosage, duration and frequency of the therapy.
All accessories should only be used by one person. Never bend the nebuliser over 60°.
– The unit should not be used in the presence of anesthetic mixture inflammable with air, oxigen or nitrous oxide.
– Device not protected against splashe
Ensure that children do not use the device unsupervised some parts are small enough to be swallowed.
Use of this device is not intended as a substitute for consultation with your physician.
In view of their length, the power cord and connection hose could constitute a strangulation hazard.
PREPARATION AND USAGE OF THIS DEVICE
Prior to using the device for the first time, we recommend cleaning it as described in the section «Cleaning and Disinfecting».
1. Assemble the nebuliser kit 14. Ensure that all parts are complete.
2. Fill the nebuliser with the inhalation solution as per your doctor's instructions. Ensure that you do not exceed the maximum
level.
3. Connect the nebuliser 9 with the air hose 8 to the compressor 6 and plug the power cord 2 into the socket.
4. Switch the ON/OFF switch 3 to position «I» to turn on the device and place the mouthpiece 10 in the mouth or fit one of
the face masks over mouth and nose.
– The mouthpiece 10 gives you a better drug delivery to the lungs.
– Choose between adult 11 or child face mask 12 or the nosepiece 13 and make sure that it encloses the mouth and nose
area completely.
5. Breathe in and out calmly during the therapy. Sit in a relaxed position with the upper body upright. Do not lie down while
inhaling. Stop inhalation if you feel unwell.
6. After completing the inhalation period recommen-ded by your doctor, switch the ON/OFF switch 3 to position «O» to turn
off the device and unplug it from the socket.
7. Empty the remaining medication from the nebuliser and clean the device as described in the section «Cleaning and Disin-
fecting».
FASTERJET NEBULIZER
This compressed air system for aerosoltherapy is equipped with the innovative Fasterjet nebuliser with a breath-enhanced valve
system 16. This enables the correct quantity of medication to be featured to the respiratory capacity of each patient. The valve
controls the flow of medication during inhalation (16/A), thus reducing medication loss during exhalation (16/B).
Fasterjet increases the quantity of inhaled medication.
Fasterjet is capable of nebulising efficiently all medications for inhalation therapy. In order to use the nebulizer synchronized
to the breathing, it is necessary to mount on the valve-holder the membrane and use the mouthpiece with expiratory valve
(14/B). A synchronized functioning of the nebuliser is possible only by using the mouthpiece with expiratory valve.
CLEANING AND DISINFECTING
Thoroughly clean all components to remove medication residuals and possible impurities after each treatment. The compressor
1 and the air hose 8 should be clea-ned with a clean, moist cloth.
Always wash your hands well before cleaning and disinfecting the accessories.
Do not expose the compressor to water or heat.
Replace the air hose for each treatment with a new patient or in case of impurities.
Unplug the device before cleaning.
7 Filter lid
8 Air hose
9 Fasterjet Nebulizer
10 Mouthpiece
11 Adult face mask
12 Child face mask
6
13 Nosepiece
14 Assembling nebuliser kit
15 Filling the nebulizer
16 "breath enhanced" nebulization
17 Replacing air filter