Publicidad
Idiomas disponibles
Idiomas disponibles
Harness user's guide EVO iZi 1 & 2
NOMENCLATURE (#1A-1B)
1
Fixed shoulder straps
2
Leg straps
3
Fastening flat buckles (#4).
4
Bavarian.
5
Sternal attachment point (A/2) to
be connected.
6
Dorsal hooking D-ring (A).
WARNINGS
- Before using this product, carefully
read through these instructions and
keep them safe.
- If this product is to be resold outside
the
first
destination
reseller must provide this instructions
manual, drafted in the language of the
country in which the product will be
used.
- Any work at heights is risky; only
individuals with perfect health and in
good physical condition should work at
heights and confront any emergency
situations.
- This equipment is a vital safety
instrument; any incorrect use can
cause mortal danger to the user in
case of a fall.
- Please note that in a fall-arrest
system,
only
an
fall-arrest harness may be used for
gripping a body.
- These fall arrest harnesses are not
suitable for work that requires being
in the suspended position (Risk of
orthostatic shock).
- It is recommended that this product
be given individually to a single user.
- Only a person who is trained and
competent, or one who is under the
surveillance of such a person, may use
this product.
- Ensure that before and during use,
a rescue plan has been developed and
is understood, so that any intervention
can be carried out effectively and
safely.
country,
the
EN361-compliant
10
DESCRIPTION (#2A - #2B)
These
fall-arrest
classified
as
personal
equipment
(PPE)
for
heights, and are compliant with the EN
361:2002 standard.
Their
configuration
guarantee
a
comfort
complete safety.
This
full
body
manufactured
using
polyester straps, sewed to each other
and connected by metal fastening and
adjustment buckles.
The fall arrest attachment points are
identified by the «A» or «A/2» markings
(dorsal attachment point and sternal
attachment
point).
ring «A» or «A/2» cannot be used as a
fall arrest attachment point.
WEARING THE HARNESS (#3)
1
Hold the harness by its dorsal
hooking point and disentangle the
straps if required.
2
Slip on the shoulder straps one
after
the
other,
without twisting the straps.
3
Buckle and adjust the chest strap
as appropriate.
4 and 5 Buckle and adjust each leg
strap after positioning them at the
crotch (#4).
(Fastening flat buckles #4) :
1 Lengthen
2 Shorten
ADJUSTING THE HARNESS SIZE (#6)
• If the harness is too small :
- Pull the textile handle covered in
Orange
tube
(a)
from
upwards to slide the upper strap in the
steel buckle.
- Pull on the upper part of the strap
(b) (Between the steel buckle and the
shoulder). Repeat this operation if
necessary.
• If the harness is too big :
- Pull the textile handle covered in
harnesses
are
protective
falling
from
and
free
size
of
use
and
harnesses
are
44
mm
wide
Any
unidentified
like
a
jacket,
the
bottom
Publicidad
