auna SCALA VCD-IR Manual Del Usario página 65

Connecting your wi-fi using the network wizard
1. Press and hold the Menu button on main unit or remote control the
Settings menu.
2. Turn and press the NAVIGATE or use the <OK> buttons on the remote
control to select 'Main menu' >'System settings' > 'Network' > 'Network
wizard'. will search for available Wi-Fi networks.
3. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to select the name (Network wizard) of your Wi-Fi
network. If your network requires a key, follow steps 5-6.
4. Enter your network key or password by turning and pressing the
NAVIGATE dial or use the <OK> buttons on the remote control to
highlight and select characters. If you want to delete the last character,
turn the Select dial or use the <OK> buttons on the remote control to
select 'BKSP' and push to confirm.
5. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to select 'OK'. will connect to your network.
Helpful hint: Your Wi-Fi key is case sensitive, make sure to enter it exactly
asshown.
Connecting your Wi-Fi using push button connect
You can use push button connect to connect your Wi-Fi if your router
supports WPS. Refer to your router user guide for more information on
WPS.
1. Press and hold the Menu button on main unit or remote control the
Settings menu..
2. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to select 'Main menu' > 'System settings' > 'Network' >
'PBC WLAN setup'.
3. Follow the steps shown on screen to finish push button connect setup.
Viewing network settings
1. Press and hold the Menu button on main unit or remote control the
Settings menu
2. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to select 'Main menu' > 'System settings' > 'Network' >
'View settings'.
3. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to display the SSID, IP address and various other network
settings.
EN
65