Samsung Evolution Kit SEK-2000 Manual Del Usuario página 8

12. Turning on the TV will display the initial setup screen. Press the touch pad. A Bluetooth icon will appear at the screen as
shown below. The TV will then attempt to connect to the Samsung Smart Control automatically.
If you are using a 2012 TV, including a cable and satellite receiver, pair the smart receiver to the TV. For more
✎
information about an IR Blaster, refer to the TV user manual.
Auto pairing will not work if the Samsung Smart Control (included) has been paired before installing the Evolution
✎
Kit. In this case, press the
have to control Samsung Smart Control apart from TV within 30cm ~ 4m. But, you must place Samsung Smart
Control toward to TV's remote control receiver.
[ The Pre-Mounting Checklist
•
Before snapping the evolution kit into place, ensure that the other end of the kit has been inserted securely into
the two slots. The kit may be damaged if you continue without securely positioning the kit inside the slots.
•
If you are mounting the kit onto a wall-mounted TV, remove the TV from the wall first.
•
Mounting an evolution kit that has been used on a different TV will reset the user data contained in the kit.
[SEK-2000-SA]BN68-06252A-00L03.indb 8
RETURN button and GUIDE
English-8
button simultaneously for 3 seconds or more. You
2014-04-17 2:59:56