3
INSTALL ANTI-TIP DEVICE
be secured by a properly installed anti-tip bracket. See
complete details before attempting to install.
To check if the bracket is installed and engaged
should be inserted into the opening on the anti-tip brace
on the range. If the bracket arm misses the brace to the
properly secured by the anti-tip bracket.
to receive one at no cost.
WB2X7909.
the bracket.
Anti-Tip Parts Provided
Anti-Tip Brace
31-2000814 Rev. 1
Installation
WARNING
• A child or adult can tip the range and be killed.
• Install the anti-tip bracket to the wall or floor.
• Engage the range to the anti-tip bracket by sliding the
range back such that the foot is engaged.
• Re-engage the anti-tip bracket if the range is moved.
• Failure to do so can result in death or serious burns
to children or adults.
NOTE: This anti-tip device may be installed on the
opposite side of the range.
Anti-Tip Bracket
For Concrete or Cement Construction: You must use
AHAM Anti-Tip
Safety Brochure
Tip-Over Hazard
through the brace and into the range.
Alternate Brace
Position
from the left (or right) side of the installation location.
to Dimension A.
Range
A
36"
A
Anti-Tip Brace
Anti-Tip Bracket
Wall Sole Plate
9