Area Measurement - BizLine 700394 Manual Del Usuario

Measurement Timer
To set the measurement timer:
1. Press to set the countdown to measure
ment timer. Press X to set the measurement
timer interval. You can set the timer between
3 and 15 seconds.
2. Set the laser in the position you want to measure from
and press
A beep is sounded when the measurement has been taken.
Area Measurement To measure an area:
1. Press once to select area measurement and activate
laser beam.
2. Follow the instructions on the main screen to
measure width
Area measurement appears on the screen.
12
to start the timer.
and length.