Tabla de contenido
Publicidad
8 mm
6
English
Installation
Remove the seat and filter from the nipple.
Wrap the threads on the nipple with Teflon tape.
Install the nipple. Tighten the nipple using an 8 mm
Allen wrench.
Seal the wall around the nipple using
waterproof sealant.
Failure to seal the wall may result in
water damage.
Flush the pipes.
Debris in the pipes may clog the
showerhead filter, resulting in poor
performance of the showerhead.
Install the seat and filter.
Publicidad
Tabla de contenido
