DJI RONIN 2 Guia De Inicio Rapido página 7

RONIN 2 Quick Start Guide
C. Balancing the Roll Axis
a. Unlock the roll axis.
b. Toggle the lever
1
camera's position by turning the adjusting knob
tilt axis 45 degrees to the left or right.
c. Tighten the securing knob
d. Lock the roll axis.
2
1
Recheck the tilt axis balance. Loosen the securing knob and adjust the camera's position if the tilt axis
is not balanced.
D. Balancing the Pan Axis
* It is recommended to mount the provided MotionBlock before balancing the pan axis when shooting in
a high-speed situation for increased gimbal performance. Attach the MotionBlock to the pan axis and
tighten the screws as shown.
a. Unlock the pan axis. Lift up one side of the Grip.
b. Toggle the lever
1
adjustment knob
2
lifting up one side of the Grip.
c. Tighten the lever
3
©
6
2017 DJI OSMO All Rights Reserved.
to the unlocked position, then loosen the top securing knob
and toggle the lever
4
*
to the unlocked position, then adjust the camera's position by turning the
until the camera remains still when rotating the pan axis 45 degrees while
.
until the camera remains still when rotating the
3
to the lock position.
5
3
1
1
2
. Adjust the
2
4
5
3