Kohler K-10217 Guia De Instalacion página 3

Stud
Lavatory
1. Install the Faucet
IMPORTANT! Plumbers putty is not needed to install this faucet.
The base of the faucet acts as a water barrier.
Insert the supply hoses and stud of the faucet through the center
hole of the lavatory.
Position the base of the faucet flush against the center hole of the
lavatory.
From underneath the lavatory, slide the bracket and washer onto
the stud.
Thread the nut onto the stud.
Tighten the nut securely against the bracket to secure the faucet
into place.
Kohler Co.
Supply Hoses
Bracket
Washer
Nut
3 1056603-2-A