Back View - Snom m9r Manual Del Usuario

1. When the handset is ready for use, connect one end of the network
cable with the NET port on the back of the base station and the
other end to a LAN port in your network (switch, router, etc.).
2. Connect the 5 V power converter to the wall outlet first, THEN to
the base station.
Reset
button
3. The power indicator comes on and the base station begins to boot.
4. When the base station has booted up, the "Call" LED will start
to blink, indicating that the base station is waiting for handset
registration.
h
andset overview
Side view
Belt clip
Volume adjust key+-
Adjust volume
Speakerphone key (on/off)
Headset jack connector 2.5 mm

Back view

v1.3.0
RESET 5V DC
Power
connector
• of ringer when call is ringing
• of speaker when in call
Loudspeaker
of
speakerphone
snom m9r Quick Start Guide
NET
Net port
Battery cover
15
E
N
G
L
I
S
H