Selecting a location
•
As insects are attracted to the light emitted by the unit,
do not place the unit too close to human activity.
•
Choose a location approximately 20 feet away from the
area you are trying to protect.
•
If there is a body of water or standing water nearby, hang
the unit between you and the source of water, as water is
a breeding ground for most flying insects.
Installation/operation
1. After you have selected a location, hang the unit
approximately 7 feet above ground from a tree, pole or
other free-standing object.
2. Plug cord into a compatible outlet or an extension cord
rated for outdoor use.
3. Once connected to an electrical source, the unit will be
on. There is no on/off switch.
4. The unit should be taken down in the event of severe
weather.
Installation
6