Product Description; Installation And Connection - Oase HeatUp 25 Instrucciones De Uso Y Garantía

PRODUCT DESCRIPTION

Intended use
Only use the product described in this manual as
follows:
• As a thermostat controlled aquarium heater.
• Operate in accordance with instructions.
The following restrictions apply to the unit:
• Only use indoors and for aquaristic purposes in
the home (not for commercial use).
• Only operate with water at a water temperature
of +4 °C to +35 °C.

INSTALLATION AND CONNECTION

N O T E
• Do not switch the unit on until it is immersed in
water.
• The unit can be completely immersed in water.
• Ensure that the unit is immersed in water at least
up to the minimum immersion depth marking.
N O T E
The desired water temperature can only be achieved
if the heating capacity of the heater is suitable for the
volume of water in the aquarium (→ Technical data)
and is positioned in an area with good water circula-
tion.
How to proceed:
 B, C, D
• Turn the temperature controller to the desired
temperature value.
• Insert the supplied suction cups into the holder by
twisting.
– Pay attention to the alignment of the tab (it
should point upwards or to the side).
• Clamp the holder to the unit.
• Position the unit with the heating element
pointing towards the floor of the filled aquarium
on a clean, smooth surface in an area with good
water circulation.
- EN -
15